Checking The Printer Voltage; Connecting The Printer - Dascom T5040 User Manual

Installation
Checking the printer
voltage

Connecting the printer

8
Make sure that the device has been set to the correct voltage (e.g. 230 V
in Europe, 120 V in the USA). To do this, check the type plate at the
back of the printer. Contact your dealer if the setting is incorrect.
Never switch on the printer if the voltage setting is incorrect,
STOP
since this may result in severe damage to the printer.
Connect the power cable to the power inlet of
the printer. Connect the power cable plug to a
mains socket.
User Guide
Type plate