Unloading Continuous Forms - Dascom 1500 User Manual

Operating the printer

Unloading Continuous Forms

To unload continuous forms:
Make sure that the Paper Select lever is set to the continuous forms position.
Press the LOAD/EJECT key. The continuous forms paper is retracted to the park
position. If the paper cannot be retracted in one operation, continue to press the
LOAD/EJECT key until the paper is parked.
The printer can retract continuous forms-paper by a recommended maximum of 30.48 cm
(12 inches) per operation (one form length).
Repeat the procedure for the left tractor
and adjust the left forms tractor to
accommodate the width of the form.
Move the left tractor to make the paper
flat. Do not stretch the paper too taut.
Push the left locking lever down to
secure the tractor in place.
Reinstall the manual paper feeder.
Press the LOAD/EJECT key to
advance the paper to the top-of-form
position from which printing can start.
The printer is automatically placed in
the Online State.
Paper handling
2-19