Inserting An Sd Card - Silvercrest DV-5100HD User Manual

Introduction

Inserting an SD Card

By using the supplied SD memory card you can increase the
camcorder storage capacity for saving your videos and photos..
When a memory card is inserted, all the recorded contents will be
saved onto it. If there is no memory card inserted, your photos and
videos will be saved to the internal memory of the camera.
Open the display and then open the memory card compartment by
sliding the cover in the direction of the arrow.
1
Then insert the memory card with the metal contacts facing forward
into the card slot. The label must face upwards. Slide the card fully
into the slot opening until the card clicks into place. Close the
memory card compartment by sliding the cover in the opposite
direction.
To remove the memory card, open the memory card compartment
and gently press on the inserted card. This will protrude a little so
that you can get a hold of it and remove it.
20 - English
Power the device off before you insert or remove
the memory card.
2
DV-5100HD