Introduction
DV-5100HD
Cables
Always hold cables by the plug and never pull on the cable itself.
Never hold the power cord with wet hands as this may cause a
short circuit or electric shock. Never place the device, heavy
objects or furniture on the cable and make sure that the cord does
not bend too much, especially at the plug and sockets. Never make
knots in the cable and do not tie it together with other cords. All
cables should be positioned so that nobody can trip over them or
be obstructed by them. A damaged power cord can cause a fire or
an electric shock. Inspect the power cord from time to time. Do not
use any adapter plug or extension cable that does not meet the
required safety standards.
Repair and Maintenance
Repairs are required when this device has been damaged in any
way: for example, when the charger or the housing of the DV-
5100HD is damaged, when liquid or objects have entered the
device, when the product has been exposed to rain or moisture,
when the product does not work normally or if the product has been
dropped. If you notice any smoke, unusual noise or strange smells,
switch off the device immediately and unplug the power cord from
the power supply. In this case the device should not be used further
and should be inspected by authorized service personnel. Please
contact qualified personnel when servicing is needed.
10 - English