Open the display and then rotate it according to your needs.
The device powers on automatically.
If the current mode is not set to photo capturing, select it by
using the mode selector switch .
Move the navigation button to adjust exposure compensation to
a positive or negative value. The set value is indicated on the
If necessary, use the zoom swivel button  to select a larger
to smaller scene area. Move the swivel button to the right to
zoom in or move the swivel button to the left to zoom out.
Press the shutter button  to capture a picture. During saving
the power indicator  will light red.
The photo taken will be shown on the display for a few seconds.
Then the device returns to capture mode and the power
indicator turns green again.
In photo mode, different icons may appear on the display informing
you about the current settings.
26 - English