Inserting An Sd Card - Silvercrest SCA 5.00 A1 User Manual And Service Information

Digital hd pocket camcoder
Hide thumbs Also See for SCA 5.00 A1:
Table of Contents

Advertisement

SilverCrest SCA 5.00 A1
1
3
3. Next insert the battery into the camcorder, as shown in figure 2.
To do this, insert its metal contacts first into the battery
compartment and then push it downwards so that it clicks into
place. When inserting the rechargeable battery, make sure that
the tag is placed around the battery so that you can remove the
battery easily from the compartment when required.
4. Close the battery compartment by first inserting the bottom part
of the cover and then push it downwards until it clicks into place
(see figure 3).

Inserting an SD Card

By using the supplied SD memory card you can increase the
camcorder storage capacity for saving your videos and photos.
When a memory card is inserted, all the recorded contents will be
saved onto it. If there is no memory card inserted, your photos and
videos will be saved to the internal memory of the camcorder.
1. Open the memory card compartment (20) by inserting your
fingernail below the cover slot and then carefully pull it upwards
and to the front.
2
Introduction
English - 19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents