Inserting An Sd Card - Silvercrest DV-5000HD User Manual

Digital camcorder
Table of Contents

Advertisement

Available languages

Available languages

Introduction

Inserting an SD Card

By using the SD memory card (not included in the package) you can
increase the camcorder's storage capacity for saving your videos and
photos. When a memory card is inserted, all the recorded contents will be
saved onto it. If there is no memory card inserted, your photos and videos
will be saved to the internal memory of the camera.
Open the display and then open the memory card compartment by sliding
the cover into the direction of the arrow.
Then insert the memory card with the metal contacts facing forward into
the card slot. Slide it fully into the slot opening until the card clicks into
place. Close the memory card compartment by sliding the cover in the
opposite direction.
To remove the memory card, open the memory card compartment and
gently press on the inserted card. This will protrude a little so that you can
get a hold of it and remove it.
If the memory card or the internal memory is exhausted, the
message Memory full will appear on the display.
18 - English
DV-5000HD

Advertisement

Chapters

Table of Contents
loading

Table of Contents