Network Configuration Menu - Cisco IP Phone Administration Manual

Unified ip phone for cisco unified communications manager 8.6 (sccp and sip)
Hide thumbs Also See for IP Phone:
Table of Contents

Advertisement

Device Configuration Menu

Network Configuration Menu

The Network Configuration menu displays device-specific network configuration settings on the phone
Table 4-19
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
Note
information about the options on that menu, see
Table 4-19
Network Configuration Menu Options
Option
Load Server
RTP Control Protocol
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-34
describes the options in this menu.
Description
Used to optimize installation time for phone
firmware upgrades and offload the WAN by
storing images locally, negating the need to
traverse the WAN link for each phone's upgrade.
You can set the Load Server to another TFTP
server IP address or name (other than the TFTP
Server 1 or TFTP Server 2) from which the phone
firmware can be retrieved for phone upgrades.
When the Load Server option is set, the phone
contacts the designated server for the firmware
upgrade.
The Load Server option allows you to
Note
specify an alternate TFTP server for phone
upgrades only. The phone continues to use
TFTP Server 1 or TFTP Server 2 to obtain
configuration files. The Load Server
option does not provide management of the
process and of the files, such as file
transfer, compression, or deletion.
Indicates whether the phone supports the
Real-Time Control Protocol (RTCP). Settings
include:
Enabled
Disabled—default
If this feature is disabled, several call statistic
values display as 0. For additional information, see
the following sections:
Call Statistics Screen, page 8-14
Streaming Statistics, page 7-11
Chapter 4
Configuring Settings on the Cisco Unified IP Phones
Network Configuration Menu, page
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
.
4-5.
OL-23091-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7962g7942g7961g7961g-ge7941g7941g-ge

Table of Contents