Cisco IP Phone Administration Manual page 99

Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Table 4-14 UI Configuration Menu Options (continued)
Option
Wideband Handset UI
Control
Wideband Headset UI
Control
Personalization
Single Button Barge
Enbloc Dialing
(SCCP only)
OL-23091-01
Description
Indicates whether the user can configure the
Wideband Handset option in the phone user
interface.
Values:
Enabled—The user can configure the
•
Wideband Handset option in the Audio
Preferences menu on the phone (choose
> User Preferences > Audio
Preferences> Wideband Handset).
Disabled—The value of the Wideband
•
Handset option in Cisco Unified
Communications Manager Administration
gets used (see Media Configuration Menu,
page 4-28).
Default: Enabled
Indicates whether the user can configure the
Wideband Headset option in the phone user
interface.
Values:
• Enabled—The user can configure the
Wideband Headset option in the Audio
Preferences menu on the phone (choose
> User Preferences > Audio
Preferences> Wideband Headset).
• Disabled—The value of the Wideband
Headset option in Cisco Unified
Communications Manager Administration
gets used (see Media Configuration Menu,
page 4-28).
Default: Enabled
Indicates whether the user can configure custom
ring tones and wallpaper images.
Indicates whether the Single Button Barge
feature is enabled for the phone.
Default: Disabled.
Indicates whether the phone will use Enbloc
dialing. If Enabled, the phone will use Enbloc
dialing when possible. If Disabled, the phone will
not use Enbloc dialing. You should disable
Enbloc dialing if either Forced Authorization
Codes (FAC) or Client Matter Codes (CMC)
dialing is being used.
Default: Enabled
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
To Change
Use Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Device Configuration Menu
4-27