Cisco IP Phone Administration Manual page 132

Unified ip phone for cisco unified communications manager 8.6 (sccp and sip)
Hide thumbs Also See for IP Phone:
Table of Contents

Advertisement

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1
Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Hold Reversion
Hold Status
Hunt Group Display
Immediate Divert
Immediate
Divert—Enhanced
Intelligent Session
Control
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
5-12
Description
Limits the amount of time that a call can be on hold
before reverting back to the phone that put the call
on hold and alerting the user.
Reverting calls are distinguished from incoming
calls by a single ring (or beep, depending on the
new call indicator setting for the line). This
notification repeats at intervals as long as the call
is not resumed.
A call that triggers Hold Reversion also displays an
animated icon in the call bubble and a brief
message on the status line.
You can configure call focus priority to favor
incoming or reverting calls.
Enables phones with a shared line to distinguish
between the local and remote lines that placed a
call on hold.
Provides load sharing for calls to a main directory
number. A hunt group contains a series of directory
numbers that can answer the incoming calls.
When an incoming call is offered to a directory
number that is part of the hunt group, this feature
displays the main directory number in addition to
the calling party.
Allows a user to transfer a ringing, connected, or
held call directly to a voice-messaging system.
When a call is diverted, the line becomes available
to make or receive new calls.
Allows users to transfer incoming calls directly to
their voice messaging system or to the voice
messaging system of the original called party.
Reroutes a direct call to a user's mobile phone to
the enterprise number (desk phone). For an
incoming call to a remote destination (mobile
phone), only the remote destination rings; the desk
phone does not ring. When the call is answered on
the mobile phone, the desk phone displays a
Remote in Use message. During these calls, a user
can use the various features of the mobile phone.
Chapter 5
Configuring Features, Templates, Services, and Users
Configuration Reference
For more information about configuring this
feature, see Cisco Unified Communications
Manager Features and Services Guide,
Reversion.
No configuration is required.
For more information, see:
Cisco Unified Communications Manager
Administration Guide,
Configuration.
Cisco Unified Communications Manager
System Guide,
Plans.
Cisco Unified Communications Manager
Administration Guide,
Configuration.
For more information, see Cisco
Unified Communications Manager Features
and Services Guide,
For more information, see Cisco Unified
Communications Manager System Guide,
Cisco Unified IP
Phones.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide,
Cisco Unified
Hold
Hunt List
Understanding Route
CTI Route Point
Immediate
Divert.
Mobility.
OL-23091-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7962g7942g7961g7961g-ge7941g7941g-ge

Table of Contents