Setting Up Ucr 2008; Configuring Ucr 2008 In Phone - Cisco IP Phone Administration Manual

Enabling EnergyWise on the Cisco Unified IP Phone

Setting up UCR 2008

The parameters that support UCR 2008 reside in Cisco Unified Communications Manager
Administration. The following table describes the parameters and indicates the procedure to change the
setting.
Table 5-4 UCR 2008 parameter location
Parameter
FIPS Mode
SSH Access
Web Access
HTTPS Server
80-bit SRTCP
IP Addressing Mode
IP Addressing Mode Preference
for Signaling

Configuring UCR 2008 in Phone

Use the following procedure to set the following UCR 2008 parameters:
•
•
•
Choose Device > Phone.
Step 1
Set the SSH Access parameter to Disabled.
Step 2
Set the Web Access parameter to Disabled.
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
5-34
Administration Path
Device > Device Settings > Common
Phone Profile
System > Enterprise Phone
Configuration
Device > Phone
Device > Device Settings > Common
Phone Profile
Device > Phone
Device > Phone
System > Enterprise Phone
Configuration
Device > Device Settings > Common
Phone Profile
System > Enterprise Phone
Configuration
Device > Device Settings > Common
Device Configuration
Device > Device Settings > Common
Device Configuration
SSH Access
Web Access
HTTPS Server
Chapter 5 Configuring Features, Templates, Services, and Users
Procedure
Configuring UCR 2008 in Common Phone
Profile, page 5-35
Configuring UCR 2008 in Enterprise Phone
Configuration, page 5-35
Configuring UCR 2008 in Phone,
page 5-34
Configuring UCR 2008 in Common Phone
Profile, page 5-35
Configuring UCR 2008 in Phone,
page 5-34
Disabling and Enabling Web Page Access,
page 7-3
Configuring UCR 2008 in Phone,
page 5-34
Configuring UCR 2008 in Enterprise Phone
Configuration, page 5-35
Configuring UCR 2008 in Common Phone
Profile, page 5-35
Configuring UCR 2008 in Enterprise Phone
Configuration, page 5-35
Network Configuration Menu, page 4-34
Network Configuration Menu, page 4-34
OL-23091-01