Scanning Between Programmed Channels (Vfo Mode); Scanning Memory Channels (Memory Mode) - Icom IC-7200 Instruction Manual

Scanning between programmed channels (VFO mode)

■
A programmed scan searches for signals between
scan edge memory channels P1 and P2.
The default frequencies for these memories are
0.500000 MHz and 29.99999 MHz.
See the PDF type Advanced Instructions for scan
edges programming details.
q V/M
Push to select the VFO mode.
w
Push to select the desired operating
MODE
mode.
• The operating mode can be changed while scanning.
e
Push to select a tuning step.
TS
• The tuning step cannot be changed while scanning.
( The programmed tuning function can be turned ON or
OFF while scanning.)
r Set the [RF/SQL] control open or closed.
• See the previous page for squelch status details.
t Push
to start the scan.
SCAN
• "
" appears while scanning.
y When the scan detects a signal, the scan either
ignores it, pauses or the scan stops, depending on
the resume setting and the squelch status.
u To cancel the scan, push
NOTE: If the same frequencies are programmed
into both scan edge memory channels P1 and P2,
programmed scan cannot start.

Scanning Memory channels (Memory mode)

■
A memory scan searches through memory channel
1 to 199 for signals. Blank (unprogrammed) memory
channels are skipped.
q
V/M
Push to select the Memory mode.
Close the squelch with the [RF/SQL] control.
w
e
Push to start the scan.
SCAN
• "
" appears while scanning.
r When the scan detects a signal, the scan stops or
pauses depending on the resume setting.
t To cancel the scan push
• Rotating [DIAL] during scan also cancels the scan.
NOTE: Two or more different memory channels
must be programmed for a memory scan to start.
.
SCAN
.
SCAN
SCAN OPERATION
NB
V/M
MW
COMP
MODE TS
RIT
TUNER FILTER
P.AMP
M-CH/RIT
SPCH
[RF/SQL]
Appears
NB
V/M
MW
COMP
MODE TS
RIT
TUNER
FILTER P.AMP
M-CH/RIT
SPCH
[RF/SQL]
Appears
5
NR ANF
METER
1 A/B 2 3
SPLIT
= 3.5
1.8 7
4 5 6
M-CL AGC
10 14 18
7 8 9
SCAN VOX
21 24 28
.
0
F-INP ENT
MNF
GENE 50
BAND
ATT
SET
1
2
3
4
5
6
7
8
9
10
11
12
ANF
NR
METER
13
2
1 A/B 3
SPLIT
1.8 = 3.5 7
4 5 6
M-CL AGC
10 14 18
7 8 9
SCAN VOX
28
21 24
.
0 F-INP ENT
MNF
14
GENE 50
BAND
ATT
SET
15
16
17
18
19
20
21
24