Threading The Upper Thread - Husqvarna Viking Sapphire 930 User Manual

1

Threading the upper thread

Make sure the presser foot is raised and the needle is in the up
position.
Press the ON/OFF switch to "O".
1. Place the thread on the spool pin and the spool cap on the
spool pin as described on page 11.
2. Spool pin in horizontal position:
Bring the thread over and behind the pre-tension thread guide
pool pin in vertical position:
S
4. Continue threading in the direction indicated by the arrows.
16
A
B
D C
E
Getting ready to sew
Bring the thread from the right into the slot on the take-up
5. Take the thread down and behind the last guide just above the