Darning And Mending; Blind Hem - Husqvarna Viking Platinum 755 User Manual

Sewing

Darning and Mending

Darning a small hole or a tear before it
becomes larger can save a garment. Choose
a ne thread in a color as close to your gar-
ment as possible.
Fabric: Woven medium, poke a small hole
to darn.
715 / 735 755
1:18 1:26
Sew:
• Place the fabric in position under the
presser foot.
• Lower the presser foot and step on the
foot control. Start sewing above the hole
and sew down over it.
• Once over the hole, touch
Continue sewing. The machine sews back
and forth across the hole twelve times
and then stops.
• To repeat the stitch with the same size,
touch . Reposition your fabric, then
step on the foot control to sew again.
The stitch will now repeat the same size
darning square in succession and the
machine will stop automatically when the
stitch is completed.

Blind Hem

The blind hem creates an invisible hem on
garments.
Fabric: Wool or other medium-weight
fabrics.
715 / 735 755
1:22
Fold the fabric as illustrated. Make sure the
folded edge of the fabric follows the inside
of the right "toe" of Blind Hem Foot D.
40
.