Threading For Twin Needle - Husqvarna Viking Victoria User Manual

Threading for twin needle
1. Insert a twin nc'eclle.
2. Wind a bobbin with the thread
you are
going to use
as the
second upper thread
3. Thread the
machine as described
and check to
ensrLrc
that the
thread lies between the inner
thread
tension
discs, inside the
lowest thread guide. Thread left
needle.
4. Attach the extra spool pin onto
the machine. Place a spool holder
under the thread.
5. Place the bobbin with the second
thread
Ofl
the spool pin.
6. Thread the machine as before hut
this thread should lie between the
outer thread tension discs, outside
the lowest thread guide. Thread
right needle.
10
User's Guide
1utoria