Installing The Option Network Interface Card - Kyocera Mita FS-6750 Service Manual

Installation
Expanding memory

Installing the option network interface card

The main board of the printer is equipped with a network interface card slot
(KUIO-LV type, 3.3 V).
Caution
Warning
1
2
3
4
5
6
!
#
FS-6750
Be sure that no foreign object such as metal chips or liquid get inside
the printer during the installation process. Operation of the printer
during the presence of a foreign object may lead to fire or electric
shock.
Turn the printer's power switch off. Unplug the printer's power cable
and disconnect the printer from the computer.
Turn the power switch off.
Remove the two screws (1) then remove the option interface card slot
cover (2) . Remove serial interface card IB-10E (Korea only).
Insert the network interface card (3) to the option interface card slot (4) .
Fix the network interface card (3) by two screws (1) .
Connect the network cable (5) to the network interface card (3) .
Set the network address from the printer operator panel. (Refer to the
printer's User's Manual)
"
!
2-13