Removing The Drum Unit - Kyocera Mita FS-6750 Service Manual

Remove the coil springs that are used to secure and press the top (metal) registra-
tion roller towards the bottom (rubber) registration roller underneath.

Removing the drum unit

Caution Before removing the drum unit, be sure to remove the developer unit
and draw out the paper feed unit half way. Do not attempt to forcibly
pull out the drum without first having done all of these procedures.
1—Remove
this screw and
pull out the
drum unit.
Disassembly: Main unit printer
Top regist. roller
5-8
Disassembly
Top regist.
roller
3—Remove the
developer unit.
2—Draw the feed
unit half way out.
FS-6750