Kyocera Mita FS-6750 Service Manual page 48

Maintenance
Cleaning the printer
Then, clean the grid using the grid cleaner supplied with the toner kit.
Take the grid cleaner from protective bag in the new toner kit, and remove the cap.
Cap
"
Grid cleaner
!
The grid cleaner pad is impregnated with water. Perform the following cleaning
procedure before the pad dries.
Attach the grid cleaner to the printer with the pad uppermost, as shown in the dia-
gram below.
Grid cleaner
When the grid cleaner is properly fit, grasp the green part of the main charger, lift
it slightly, and pull outwards. Repeat the above for approx. five times. The wet part
of the grid cleaner cleans the grid of the main charger unit (bottom).
3-6 FS-6750