Kyocera Mita FS-6750 Service Manual page 130

Table 6. 5
Message
Print overrun
Press GO
RAM disk error ##
Press GO
Virtual mail
box fail
: Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the
alarm buzzer.
Corrective action
Press the GO key to resume printing. (The page may
break in some pages.) You can abandon printing by the
CANCEL key.
Note: After this message has been displayed, Page pro-
tect mode will be On. To maintain optimum use of mem-
ory during printing, display >Page protect from the
operator panel, and re-select Auto. Refer to printer's
User's Manual.
If Auto Continue is set to On, printing will be automati-
cally resumed after a preset period of time. Refer to
printer's User's Manual.
Look at the error code given in place of ## and refer to
the corresponding description below.
01 : Abnormal format. Try turning the power off and on
again.
02 : RAM DISK mode is Off. Turn RAM DISK mode On.
04 : No disk space. Clean up files.
05 : Specified file not on disk.
06 : No insufficient printer memory to support RAM
disk. Expand printer memory.
The storage area for the VMB is full. Purge accumulated
VMB data by printing or deleting them.
6-10
Troubleshooting
General error handling
FS-6750