Disassembly
Disassembly: Main unit printer
Replacing the heat roller
To replace the heat roller, align the positioning keys on both collars so that they
face the paper input side (the drum unit side) [horizontally].
Then insert the heat roller retainer back in place.
roller heat
Removing the controller box
Before removing the controller box, several parts must be removed first. Refer to
the following pages and refer to the section titled as follows.
•
•
•
•
•
FS-6750
Keys
page 5-3,
Removing the developer unit
page 5-8,
Removing the drum unit
page 5-10,
Top side cover
page 5-10,
Removing covers
page 5-12,
Removing front cover
5-17