Installing The Dimm - Kyocera Mita FS-6750 Service Manual

Installation
Expanding memory

Installing the DIMM

Caution
Warning
1
2
3
4
FS-6750
Be sure that no foreign objects such as metal chips or liquid get inside
the printer during installing DIMMs. Operation of the printof a foreign
substance may lead to fire or electric shock.
Before proceeding installation, turn the printer's power switch off.
Unplug the printer's power cable and disconnect the printer from the
computer or the network.
Turn the power switch off.
Remove the memory card (CompactFlash) that may be inserted in the memory
card slot at the right side of the printer.
Remove the main board (1) by removing the five (plated) screws (2) .
Pull the main board (1) all the way out of the printer.
2
1
2-9