Disassembly
Disassembly: Main unit printer
Flap the magnet roller protective cover up.
Install the developer using the reverse manner of removing the developer
explained above. Connect the developer connector.
Removing the paper feed unit
The paper feed unit can be removed from the printer without using tools. First, be
sure to remove the paper cassette entirely out. Otherwise, the paper feed unit will
not come out.
To remove the paper feed unit, first remove the paper cassette out. While holding
and pushing the locking tabs at both sides of the paper feed unit, draw the paper
feed unit all the way out.
1. The protective cover is not provided with the developer unit that is originally supplied with the printer.
FS-6750
1
5-5
Protective
cover
Locking tab