Table of Contents
Advertisement
Disassembly
Disassembly: Main unit printer
Top side cover
Open the toner container access door. Remove two screws Ê. While holding the
spring-loaded back side cover to open, pull the back plane of the top cover away
from the printer, then pull it upwards to remove.
Removing covers
The right side cover is snapped onto the chassis by catches and holes. No screws
are used. To remove the right side cover, release those catches and holes at the
front and the rear from each other, by inserting a small flat blade screw driver
between the cover and the chassis. Then, free the catches at the bottom by lowering
the top side of the cover downwards.
Right cover
Left cover
5-10
FS-6750
Advertisement
Chapters
Table of Contents
