Kyocera Mita FS-6750 Service Manual page 158

B.1 Status page
The printer can print different types of the status page—the user (nomal) status
page and the service status page. This section exclusively describes the service sta-
tus page. For information on the user (nomal) status page, refer to the printer's
user's Manual.
Information obtainable on the service page include various settings for the printer,
service statistics, etc. To print a service status page, proceed as follows:
Printing the service status page
To print a service status page, using the MENU key. Or, have a PC running MS-DOS
and proceed as follows:
Connect the printer to the PC via the parallel interface.
1
Ensure that the printer is ready to print.
2
At the DOS prompt, type:
3
echo !R! STAT 1; EXIT; >lpt1:
The service status page is printed. (If you omit ‘1,’ a user status page is printed.).
Service information on the status page
An example of the service status page is shown below. (Note the details born by a
status page may differ from a firmware version to another.) Most of the service
information is located under Service information.
Most of these service information on the status page are alphanumerically-coded.
Each item is explained next page.
B-2 FS-6750