Shipping The Developer Unit; Installing A New Developer - Kyocera Mita FS-6750 Service Manual

Note After removing the developer, seal it in the protective bag and place it
on a flat sur-face. Do not place the developer in a dusty area. If you
ship the developer, pack it in the shipping container specifically sup-
plied with the printer. See Shipping the de-veloper unit on page 5-8.
Also do not touch the developing roller of the developer. Do not place
floppy disks near the developer.

Shipping the developer unit

If the developer unit is shipped (the developer must be shipped separately if the
printer is shipped), it must be fit in the shipping container supplied originally with
the printer.
Shipping
container
First, flap the magnet roller protective cover down. Put the developer unit in the
plastic bag supplied with the shipping container. Put the developer unit into the
shipping container.

Installing a new developer

Use a developer unit DV-27TW/DV-27CH for replacement. Produce the developer
unit from the protective bag.
Disassembly: Main unit printer
5-4
Disassembly
FS-6750