Installing Network Interface Card (Optional) - Kyocera Mita FS-6020 Service Manual

1-3-3 Installing network interface card (optional)

Procedure
1. Remove the two screws and then remove the
optional interface slot cover.
2. Insert the network interface card into the
optional interface slot.
3. Use the two screws to secure the network
interface card.
4. Connect the network cable (in the case of IB-
20 or IB-21E).
5. Perform the network setting. (See IB-2x quick
configuration guide.)
Setting items for wireless network interface card IB-22
Variable name
Wireless LAN Mode Ad hoc/802.11 Ad hoc/
Infrastruccture/Automatic
SSID Any string (up to 32 characters)
Channel Depends on the setting range
available for the wireless NIC.
Encryption(WEP) DISABLE/64 bit/128 bit
WEP key Hexadecimal setting (00-FF)
64 bits = 10 digits
128 bits = 26 digits
Setting range
Optional interface slot
Cover
Network interface card that can be installed
Part number
IB-20 10 Base-TX,100 Base-TX,10 Base2
IB-21E 10 Base-TX,100 Base-TX
IB-22 Compatible to IEEE 802.11b
Figure 1-3-13
Network interface
card
Figure 1-3-14
Network
interface
Screws
card
Screws
Specifications Remarks
Wireless LAN
Network cable
FS-6020
IB-22
1-3-9