Aastra 142d User Manual page 83

Features and Menus
call forwarding with the On option. Active call forwarding is indicated by a
"+" sign. This is followed by the call forwarding destination.
Note: All calls for the call numbers of your device are forwarded (exception:
hunt group call numbers). If a number is in use on more than one
telephone, then calls made to any of the other telephones will be
forwarded as well.
Divert MSN (MSN call forwarding): Use the "Divert MSN" (MSN = Multiple
Subscriber Number) to forward incoming external calls per MSN to
external destinations. Several MSNs can be grouped together (this is
configured by the system administrator) and forwarded to a common
destination number.
A list of the configured MSNs and MSN groups is displayed. Select an entry.
Select the desired forwarding type: Immediately, Busy, or After delay.
Then enter the external destination and activate call forwarding. Active call
forwarding is indicated by a "+" sign. This is followed by the call forwarding
destination. A "?" preceding the entry, (e.g. ? MSN Group 1), means that call
forwarding is active for only some MSNs or that there are different call
forwarding types activated for this group.
Note: For the "Divert MSN" type of call forwarding, the (external)
destination number is always entered without the area code. If "Divert
MSN" is executed in the exchange (= external call forwarding; configured
by the system administrator), it can take a few seconds after configuration
for call forwarding to be activated in the exchange.
Divert door (door call forwarding): This is where you can programme "Divert call
immediately" for door calls. If several doorbells are configured on the
communications system, first select the doorbell whose calls are to be
diverted. The number of doorbells available and with which names they are
listed in the menu, depends on the type of entrance intercom. Consult your
system administrator if you have questions concerning the configuration of
the doorbells. Then enter the call forwarding Dest (destination) (for
information on entering the call number please refer to the chapter
External Seizure and Entry of Call Numbers starting on page 42 also).
Activate the call forwarding with the On option. Active call forwarding is
indicated by a "+" sign. This is followed by the call forwarding destination.
Remote divert (call diversion for): You can also configure call forwarding for other
OpenCom 100 / Aastra 800 users. Programming call forwarding for a virtual
call number is also possible (please refer to Call for a virtual call number
(Tele Secretary) on page 49 also). In order to do so, "Call forwarding for
other user" authorisation is required, otherwise this menu item will not be
displayed. Also, you can configure call forwarding only for those users
75