Call Forwarding" Menu - Aastra 142d User Manual

Features and Menus
Charges: Here you see the amount charged for the last call and the total charges
for your device. If there are multiple trunk keys configured on your
telephone, you can view the individual charges for each of these keys. To do
so, select the desired key (e.g. L1: [internal call number]) and then press
the Ok softkey.
Remote charges: You can view the charges of other OpenCom 100 / Aastra 800
users. To do so, your user group has to have "Costs" authorisation granted
by your system administrator. Enter the internal call number of the other
user. You can also select a call number from the phone book.
Hunt group: If your telephone belongs to one or more hunt group(s), you can use
this menu entry to switch hunt group signalling for your telephone on or
off. When there are multiple trunk keys configured on your telephone and
assigned to hunt group call numbers, you can switch the hunt group
signalling for each of these keys on or off. To do so, select the desired key
(e.g. L1: [internal call number]) and then press the Ok softkey.
HG no.: [internal call number]: The pick-list of hunt group call numbers

"Call forwarding" Menu

Select one of the following menu entries in the Call forwarding menu...
Call diversion: Programming call diversions for your own telephone. If there are
multiple trunk keys configured on your telephone, you can programme call
diversions for each of these keys. To do so, select the desired key (e.g. L1:
[internal call number]) and then press the Ok softkey. Select the desired
forwarding type: Immediately, After Delay or Busy. Then enter the call
forwarding Dest (destination) (for information on entering the call number
please refer to the chapter External Seizure and Entry of Call Numbers
starting on page 42 also). Time: When programming call forwarding after
delay, you enter the time in seconds after which a call is to be forwarded
(10 ... 120 seconds). If you do not enter a value, the default time interval
provided by the system administrator at system configuration is used
(default: 20 seconds). Then you select whether only internal calls, only
external calls or all calls are to be forwarded to the destination. Activate the
74
appears. Activated hunt group calls have a "+" prefixing the hunt
group call number; deactivated ones have a "-". You can switch
signalling of hunt group calls to your telephone for the call number
dialled using the On/Off options. Use the All menu entry to switch
signalling of all hunt group calls on or off for your telephone or for
the trunk key selected (On/Off ).
Note: If you are the last reachable member of the hunt group and
you log out then any further callers will hear a busy signal.