Basic Functions
Menus
Menu Before and During a Call
When the handset is in the idle or call state, state-dependent menus are displayed
when you briefly press the Menu softkey. Frequently used features are shown
which you can activate.
Examples:
1. Another telephone in your pick-up group rings and you want to accept the call.
Press the Menu softkey briefly, select Pick-up and confirm your choice with OK.
You will be connected with the caller.
2. Or a subscriber is busy and you want to be called back. When you hear the busy
signal, press the Menu softkey and confirm Callback with Ok.
The state-dependent menus are individually described at the end of the following
chapters.
Menu when Idle
Note
Menu items marked with an * are only displayed if the corresponding user
authorisation has been set for your user group in the OpenCom 100 / Aastra 800
Configurator. Please contact your system administrator if you have any
questions.
When idle, press the Menu softkey briefly (also possible if you have already
A
pressed the
Un Park: Consecutively "unparks" one or more connections which you have
previously parked, for instance to make enquiries or to forward calls (see
also Menu during Conversation starting on page 46).
Pick-up:* You accept the call for another telephone in your pick-up group.
Pick-up select:* You accept a call for any other internal caller. Enter the call
number of the other telephone. If the other telephone is already in the call
state (e.g. an answering machine is making an announcement), you pick up
the call. The subscriber for whom you picked up the call must belong to a
user group for which "Call removal" authorisation is activated, otherwise
"Pick-up select" is not possible.
40
call key) and then dial...