Transferring An External Call To An External Subscriber - Aastra 142d User Manual

At the communications systems aastra 800 and opencom 100
Hide thumbs Also See for 142d:
Table of Contents

Advertisement

Telephoning
If the called subscriber accepts the call, he/she will be connected to the waiting
call. If the call is not accepted within a certain time interval (the communications
system is 45 seconds by default, the system administrator can change this value),
you get an automatic recall. After pressing the
the original subscriber once again.
If the system administrator has configured the Music on hold upon transfer on
calling feature in the Configurator, the caller on hold hears "Music on Hold" while
his/her call is signalled to the other internal subscriber. This setting also deter-
mines whether, when calling back, the caller hears "Music on Hold" or a ringing
tone or busy signal.
The subscriber called via enquiry is busy:
Menu
Press softkey briefly.
F
Use the arrow keys to select and confirm the Disconnect menu
entry.
OK
Press softkey to confirm.
Z
Enter another internal call number to transfer the call.
or
R
Press R key briefly. You are speaking with the waiting subscriber
once again.

Transferring an External Call to an External Subscriber

External calls can only be transferred to an external subscriber via the caller on
hold menu (see page 54).
Menu
Press softkey briefly.
F
Use the arrow keys to select the Transfer menu entry.
OK
Press softkey to confirm transfer.
Depending on your communications system's settings, the external calls will be
switched together on your communications system or on the exchange of your
network operator.
A
call key you are connected with
53

Advertisement

Table of Contents
loading

Table of Contents