Aastra 142d User Manual page 91

At the communications systems aastra 800 and opencom 100
Hide thumbs Also See for 142d:
Table of Contents

Advertisement

Features and Menus
Auto Answer: If this function is activated the mobile unit automatically
answers a call after the first ring (useful when using a headset). Note:
If you are not using the headset, then please deactivate this function
as a caller may listen in unnoticed otherwise.
Silent Charging: As long as the mobile unit is in the charging station no
calls are signalled. This applies to both acoustical signalling as well as
optical signalling or to the vibration signal generator.
Charger Answer (Automatic Answer): If this feature is activated, the mobile
unit automatically answers a call when it is removed from the
charging station (this means the
pressed). When the mobile unit is replaced into the charging station,
the call is switched to the handsfree mode.
Auto.Quick Hook (Automatic speed dialling): If this feature is activated, a
local phone book entry designated for speed dialling is dialled
immediately (see page 68). Dialling additional single digits after
dialling has taken place is not possible. If it is deactivated, the
corresponding call number goes to pre-dialling first and digits can
be added.
Auto.Key Lock (Automatic Key Lock): If this feature is activated, the key
lock is automatically activated 60 seconds after the last key press
when the device is idle.
Charging LED: After removing the mobile unit from the charging station
the display illumination goes on. Switch this function off if you wish
to save energy.
Disp.Contrast: Select the level of display contrast by entering a number
(1 ... 8) or with the arrow keys.
Date/Time: You can select the time and date format customary in your
country here. If the time is not transmitted by the communications
system, you can set it in the "Phone Settings" menu (see page 78).
Date Format: Select the date format dd.mm.yy (e.g. 31.12.08) or
Time Format: Select the 24 hour or 12 hour (am/pm) format.
Call time: If this feature is activated the call duration appears on the
Display Time: You can switch display of the current time on/off.
Reset: Use the following menu entries to reset settings:
mm/dd/yy (e.g. 12/31/08).
display during a call.
A
call key does not have to be
83

Advertisement

Table of Contents
loading

Table of Contents