Updating Software - Aastra 142d User Manual
At the communications systems aastra 800 and opencom 100
Hide thumbs
Also See for 142d:
- User manual (80 pages) ,
- User manual (124 pages) ,
- User manual (108 pages)
Table of Contents
Advertisement
Installing USB Drivers
Windows Device Manager: USB driver components
Updating Software
The software for your Aastra 142d can be updated using a USB data cable.
Carry out the following steps to update the software for your Aastra 142d:
1. Install the USB driver (see Installing USB Drivers starting on page 93) and
connect the Aastra 142d to your PC.
2. Start the programme for updating the software of your Aastra 142d.
3. Follow the instructions of the PC programme to carry out the software update.
After the programme has determined the configuration, your telephone is
switched off.
4. Switch the device on again while holding down the
pressing the
94
R
key. Now your telephone software is updated.
F
arrow key and then
Advertisement
Table of Contents
