Installation
Closing the battery compartment
After inserting the MEM card (please refer to page 12), position the battery com-
partment cover slightly diagonally as shown (1) and flip it downwards (2) until it
has clearly clicked into place.
Note
Switch off the mobile unit before removing the batteries as there may be a loss of
data otherwise.
Charge Display
The charging status of the battery is shown on the display. The following means:
81 - 100% charged
61 - 80% charged
41 - 60% charged
21 - 40% charged
0 - 20% charged
(Frame flashes) Battery nearly discharged,
warning tone issued
Your handset has a "battery management system" that must determine the limits
of the battery charging status before it can display an accurate charge level.
When the battery has been replaced, the charge level is not correctly dis-
played until a whole charge and discharge cycle has been completed.
1
2
11