Aastra 142d User Manual page 49

At the communications systems aastra 800 and opencom 100
Hide thumbs Also See for 142d:
Table of Contents

Advertisement

Basic Functions
Note: If the called subscriber is a member of a user group for which pick-up
protection is active, "Pick-up" and "Pick-up select" are not possible.
Take: You wish to take a current call from one terminal over to your DECT
telephone and continue the call on the DECT telephone. To do so, your
DECT telephone and the other terminal must have the same internal call
number.
Announcement:* After entering the call number, you can initiate an
announcement to another system terminal (or to a group of system
terminals).
Intercom:* After entering the device ID, you can initiate an announcement to a
single system terminal. The microphone of the terminal called will be
switched on and the person you are calling can immediately answer your
announcement. The "Intercom" function cannot be used for
announcements to a group of terminals.
Charges: Here you see the amount charged for the last call and the total charges
for your device.
Door opener:* You activate the door opener.
Notes: Make a note of a call number and a name or dial a notated call number.
Suppress number:* Your call number is not transmitted to the person you call
next.
Transmit number:* Your call number is transmitted to the person you call next
LCR off:* You switch off LCR (Least Cost Routing) for the next call.
VIP call:* Your next internal call is executed as a VIP call. Even when the internal
subscriber called (with system terminal only) has activated call waiting
protection, call protection or call forwarding, your call is signalled
acoustically.
Main menu: The Main menu is called, see "Main" Menu starting on page 70.
41

Advertisement

Table of Contents
loading

Table of Contents