Connections" Menu - Aastra 142d User Manual

Features and Menus

"Connections" Menu

The following features are executed if the current connection state of your tele-
phone permits. These features are also available in the state-dependent menus.
Select one of the following menu entries in the Connections menu...
Select Call pick-up then...
Pick-up: You pick up the call intended for another telephone in your pick-
up group.
If the called subscriber belongs to a user group with pick-up
protection activated, you cannot pick up calls for that person's call
number.
Pick-up select: After entering the call number, you pick up the call for any
other telephone.
If the called subscriber belongs to a user group with pick-up
protection activated, you cannot pick up calls for that person's call
number.
Note: If the other telephone is already in the call state (e.g. an
answering machine is making an announcement), you can pick up
the call with "Pickup select.". The subscriber for whom you picked up
the call must belong to a user group for which "Call removal"
authorisation is activated, otherwise "Pick-up select" is not possible.
Take: You wish to take a current call from one terminal over to your DECT
telephone and continue the call on the DECT telephone. To do so,
your DECT telephone and the other terminal must have the same
internal call number.
Select Dial then...
Announcement: You direct an announcement to other system terminals
(please refer to page 59). Enter the call number under To:.
Announcements can also be directed to call numbers where
multiple subscribers can be reached (e.g. a hunt group call number).
Note: If a called subscriber has announcement protection on (see
page 84), this feature is not executed.
Intercom: This function is for directing an announcement to a single
system terminal and the microphone is switched on on the system
terminal called (please refer to page 59). The subscriber called can
answer you immediately without having to press a key. Enter the
86