Menu During The Conference - Aastra 142d User Manual

At the communications systems aastra 800 and opencom 100
Hide thumbs Also See for 142d:
Table of Contents

Advertisement

Telephoning
F

Menu During the Conference

Note
Menu items marked with an * are only displayed if the corresponding user
authorisation has been set for your user group in the OpenCom 100 / Aastra 800
Configurator. Please contact your system administrator if you have any
questions.
You are in a three-way conference. Press the Menu softkey briefly and then dial...
Hands-free on or Hands-free off: You switch hands-free on or off.
Disconnect (e.g. Disconnect 034565483): You disconnect the caller with the call
number 034565483 from the conference (in this example, an external
caller) and continue the call with the other caller.
Phone book: you can add the call number of the person you are speaking with
into the phone book of the OpenCom 100 / Aastra 800 (New entry) or add
it to an existing entry (Add). Please refer to: Add Phone Numbers from Lists
or during a Call starting on page 66.
Park call:* You "park" the caller to whom you had established an enquiry
connection before you initiated the conference (please refer to Parking
Calls starting on page 58 also). The conference is thus ended.
Booking number:* When you call an external subscriber and have included the
person in the conference, you can assign a booking number to the call data
of this connection. Enter the booking number (8 digits max.) under No. and
confirm with the OK softkey. Please refer to the Calls with Booking Numbers
starting on page 37 chapter for further information on this function.
Transfer:* You switch yourself out of the conference. The other subscribers remain
connected.
56
Use the arrow keys to select the Disconnect menu entry (e.g. Dis-
connect 034565483 for the subscriber with the call number
"034565483") and confirm with the OK softkey. The subscriber is dis-
connected from the conference and you continue the call with the
other subscriber.
or:
Select the Toggle menu entry and confirm with the Ok softkey. The
connections to both callers are held and you can toggle between
them both using the
R
key.

Advertisement

Table of Contents
loading

Table of Contents