Features And Menus; How To Set Features; Main" Menu - Aastra 142d User Manual

Features and Menus

Features and Menus

How to Set Features

There are different ways to set the features of your telephone and of the system:
Using Menus
Use the mobile unit menus to conveniently make settings on the desired features
(please refer to Menu Navigation starting on page 28 also).
Some menu entries are only shown on your telephone when you belong to a user
group authorised to use the corresponding feature. Contact the system adminis-
trator when you have questions on specific features or are not able to use a feature
satisfactorily.
Using code number procedures
Many features can also be configured by entering code numbers. Code numbers
are entered via the
series of numbers (
Code number input is especially intended for analogue terminals on your system.
Code numbers can also be used on your mobile unit. They are described in the
short user guide "Code-number Procedures" (this is supplied with the system). A
current online overview on the Codes entry is available anytime in the System
Info menu of the OpenCom 100 / Aastra 800 communications system Web
console.

"Main" Menu

This menu contains all available features. Some of the menu items can be found in
other state-dependent menus as well. For example, received e-mails are available
in the Main menu under Messages and also available via the
which affect your telephone's reachability (e.g. call protection activated) are
located in the Main menu and also in the Active Features menu which you can
access via long key press of the
Press the Menu softkey longer or, if the telephone is idle, press the Menu softkey
briefly and select the Main menu menu entry. This displays the primary menu
groups...
Calls: This contains the most important features relevant to a call.
70
* #
and keys respectively and in combination with a specific
0 9
to keys).
B
Info key.
B
Info key. Features