Call Waiting Menu - Aastra 142d User Manual

Telephoning

Call Waiting Menu

Note
Menu items marked with an * are only displayed if the corresponding user
authorisation has been set for your user group in the OpenCom 100 / Aastra 800
Configurator. Please contact your system administrator if you have any
questions.
You are making a call and receive a call. Press the Menu softkey briefly and then
dial...
Hands-free on or Hands-free off: You switch the handsfree mode on or off.
Disconnect: You disconnect the current call and accept the call-waiting call.
Phone book: you can add the call number of the person you are speaking with
into the phone book of the OpenCom 100 / Aastra 800 (New entry) or add
it to an existing entry (Add). Please refer to: Add Phone Numbers from Lists
or during a Call starting on page 66.
Park call:* You park the first call. Then press the
telephone to accept calls. The call-waiting call will then be signalled like a
normal call. Press the
waiting subscriber. After you have finished this call you can "unpark" the
parked call by briefly pressing the Menu softkey. Please refer to the chapter
Parking Calls starting on page 58 for further information on this function.
Reject: Reject the call-waiting call by pressing the OK softkey. The caller hears the
busy signal.
Accept: Accept the call by pressing the OK softkey. The connection to the original
subscriber is held in enquiry. You can now toggle back and forth between
the two callers (please refer to the chapter Enquiry, Toggling, Transfer
and Conference starting on page 52 also).
Deflect:* You do not accept the call yourself, rather deflect it to another
subscriber. Enter the call number of this subscriber under To: and then
press the OK softkey. You can only use the "Deflect" function if your user
group has the authorisation to deflect to internal and/or external
destinations.
Door opener:* You activate the door opener.
A
call key and you are connected with the call-
A
call key to enable your
51