Softkey: Esc; Softkey: Redial; Softkey: Menu; Call Key - Aastra 142d User Manual

Functions

Softkey: Esc

Press the Esc softkey briefly to exit the section of the menu currently displayed.
You will then see the selection from the previous menu branch or the current idle
or call display. When you navigate within the menu and press and hold the Esc
softkey the menu closes and the telephone returns to the idle state once again.

Softkey: Redial

¤ Allows you to select a call number from the redial list.

Softkey: Menu

A long key press of the Menu softkey in the idle state: the main menu is displayed.
This menu is where you can make all desired phone settings. The individual menus
are explained in the chapter "Main" Menu starting on page 70.
A short key press to the Menu softkey: depending on the mobile unit state, dis-
plays a menu with only relevant operations, i.e. ones that can currently be exe-
cuted.

Call Key

A
The call key has the same function as "lifting the receiver" or "replacing the
receiver" on a conventional telephone.

Speaker/Handsfree Key

L
Activates the speaker/handsfree mode. When speaker/handsfree is activated,
this key is lit. This key flashes when there is a call. You can accept the call using the
loudspeaker key and conduct the call in the handsfree mode.

Info Key

B
Use the Info key to access the various lists (e.g. caller list) as well as view and
change currently activated features (e.g. call protect, call diversion).
If there are new calls, e-mails, short messages or voicebox messages the Info key
flashes. When a short message or e-mail is received, the
a voicebox message is received, the
Note
In order to be able use the Info key, your OpenCom 100 communications system
must be using a software version of at least 5.22.
24
symbol.
symbol appears; when