System Menu: "Call Forwarding - Aastra 610 User Manual

The Device Menu

System menu: "Call forwarding"

Call forwarding: Programming call diversions for your own telephone. If there are
multiple trunk keys configured on your telephone, you can programme call
diversions for each of these keys. To do so, select the desired key (e.g. L1:
[internal call number]) and then press the Ok softkey.
Immediately / After delay / Busy: Select the desired forwarding type.
Dest.: Enter the call number you wish to forward to (for entering the call
Time: When programming call forwarding after time, enter the time in
Internal calls / External calls / Int./ext. calls (internal & external calls):
On/Off: Switching call forwarding on or off. Active call forwarding is
Note: All calls for the call numbers of your device are forwarded. If a
number is in use on more than one telephone, then calls made to any of the
other telephones will be forwarded as well.
Divert MSN (MSN call forwarding): Use the "Divert MSN" (MSN = Multiple
Subscriber Number) to forward incoming external calls per MSN to
external destinations. Several MSNs can be grouped together (this is
configured by the system administrator) and forwarded to a common
destination number. A list of the configured MSNs and MSN groups is
displayed.
Immediately / After delay / Busy: Select the desired forwarding type.
Dest.: Enter the external call number to be forwarded to. For the "Divert
On/Off: Switching call forwarding on or off. Active call forwarding is
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
number, please refer to the chapter entitled External Seizure and
Entry of Call Numbers starting on page 41).
seconds after which a call is to be forwarded (10 sec ... 120 sec). If
you do not enter a value, the default time interval provided by the
system administrator at system configuration is used (default:
20 seconds).
Select which calls are to be forwarded.
indicated by a "+" sign. This is followed by the call forwarding
destination.
MSN" type of call forwarding, the (external) destination number is
always entered without the area code.
indicated by a "+" sign. This is followed by the call forwarding
destination. A "?" preceding the entry, (e.g. ? MSN Group 1), means
that call forwarding is active for only some MSNs or that there are
different call forwarding types activated for this group.
99