Table of Contents
Advertisement
Date/Time Page
The Date/Time page (FIG. 53) allows setting and alteration of the time and date information on the NetLinx
Master. If either the Time or Date is modified on this page and then updated to the Master by pressing the Set
Time button, all devices communicating to that target Master will then be updated to reflect the new
information.
FIG. 53
Date/Time page
Date/Time Page
Connection Status icon: Shows the current state of the panel's connection to the Master (green = online, red =
Current Date/Time:
Get Time/Set Time
buttons:
Time Display fields:
Date Display fields:
Back:
The NXD-430 and NXD-435 touch panels do not have an onboard clock. This page
both receives and sets the time and date of the NetLinx Master.
To override the Master's registered time, press the Set Time button to open the Set Time page (FIG. 54). Click
each field to select it and use the Up/Down arrow buttons to increase or decrease the time factor
NXD-430/NXD-435 4.3" Wall/Flush Mount Touch Panels
offline). See the Connection Status Icon section on page 46 for details.
This section displays the currently registered time. Press the Get Time or Set Time
buttons to change the date or time.
This section provides two options:
• The Get Time/Date button retrieves the Time and Date information from the
Master.
• The Set Time/Date button sets the Master to retain and save any time/date
modifications made on the Date/Time page.
Use this option to override the Master's registered time.
If making changes to the panel time and date, this button must be pushed before
the changes are saved. Use the Up/Down arrow buttons to increase or decrease
the time factor.
• These fields display the time in three formats: STANDARD, STANDARD
AM/PM, and 24 HOUR.
• These fields display the calendar date information in several different formats.
Returns to the previously active touch panel page without saving changes.
Setup Pages and Descriptions
51
Advertisement
Table of Contents
