AMX NXD-430 Operation/Reference Manual page 32

4.3" modero wall/flush mount touch panels
Hide thumbs Also See for NXD-430:
Table of Contents

Advertisement

Configuring Communication
Press to access the on-screen
Device Number keypad
FIG. 18
Protected Setup Page
5.
Enter a Device Number for the panel into the Device Number keypad.


When using multiple panels within a NetLinx System, remember to assign unique
Device Number values to each panel, so that all assigned panels appear in the
System listing for the target Master.
6.
Press Done to close the keypad, assign the Device Number, and return to the Protected Setup page.
7.
Press the Reboot button to restart the panel and incorporate the changes.
Before continuing, open NetLinx Studio. This program assists in developing a System
Number, Master IP/URL, and Master Port number.
Refer to the NetLinx Master's instruction manual for more information.
Obtain the System Number and Master IP Address from NetLinx Studio. This
information must be specific for the system used with the configured Modero panel.
8.
Press the Front Setup Access button for 6 seconds to open the Status page, and press the Protected
Setup button to open the Protected Setup page (see FIG. 17 on page 21).
9.
Press the System Settings button (see FIG. 18) to open the System Settings page (FIG. 19 on page 23)
and begin configuring the communication settings on the panel to match those of the target Master.
The two possible Master Connection Types available are USB or Ethernet.


22
Press to access the System Settings page
Default = 0
Range = 1 - 32000
A USB connection type is a direct connection from the panel's mini-USB port to a corresponding
USB port on the PC, which is acting as a Virtual Master.
The mini-USB connector MUST be plugged into a panel that is already set to USB communication
(instead of Ethernet) before the PC can recognize the connection and assign an appropriate USB
driver.
An Ethernet connection type involves indirect communication from the panel to a Master via an
Ethernet connection to the network.
Press to reboot the panel
NXD-430/NXD-435 4.3" Wall/Flush Mount Touch Panels
Press to return to the
Status page

Advertisement

Table of Contents
loading

This manual is also suitable for:

435Nxd-435pNxd-435

Table of Contents