AMX NXD-430 Operation/Reference Manual page 48

4.3" modero wall/flush mount touch panels
Hide thumbs Also See for NXD-430:
Table of Contents

Advertisement

Configuring Communication
FIG. 38
Web Control VNC installation and Password entry screens
7.
Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl
application on your computer. This application contains the necessary Active X and VNC client
applications necessary to view and control the panel pages from your computer.
The G4 Web Control application is sent by the panel to the computer that is used for
communication. Once the application is installed, this popup will no longer appear.
This popup will only appear if connecting to the target panel using a different
computer.
8.
In some cases, a Connection Details dialog (FIG. 39) may appear that requests a VNC Server IP Address.
This is the IP Address of the target touch panel, not the IP of the Master. Depending on the method of
communication being used, it can be found in either the:



FIG. 39
Connection Details dialog
9.
If a WebControl password was set up on the G4 WebControl page, a G4 Authentication Session password
dialog box appears on the screen within the secondary browser window.
10.
Enter the Web Control session password into the Session Password field (FIG. 38). This password was
previously entered into the Web Control Password field within the G4 Web Control page on the panel.
11.
Click OK to send the password to the panel and begin the session. A confirmation message appears
stating "Please wait, Initial screen loading.".
The secondary window then shows the same G4 page being displayed on the target G4 panel. A small circle
appears within the on-screen G4 panel page and corresponds to the location of the mouse cursor. A left-mouse
click on the computer-displayed panel page is the same as an actual touch on the target G4 panel page.
38
Wired Ethernet - System Connection > IP Settings section within the IP Address field.
Wireless - Not available with the NXD-430 panel.
If this field does not appear, continue to step 9.
IP Address of touch panel
- obtained from IP Settings section of
the System Connection page
NXD-430/NXD-435 4.3" Wall/Flush Mount Touch Panels

Advertisement

Table of Contents
loading

This manual is also suitable for:

435Nxd-435pNxd-435

Table of Contents