Connection Status Icon; Display - AMX NXD-430 Operation/Reference Manual

4.3" modero wall/flush mount touch panels
Hide thumbs Also See for NXD-430:
Table of Contents

Advertisement

Setup Pages and Descriptions
Setup Page (Cont.)
Protected Setup:
Time:
Back:

Connection Status Icon

The icon in the upper-right corner of each Setup page shows the current state of the panel's connection to the
Master. The Connection Status Icon provides a visual update of the panel's connection status, regardless of
what page is currently active.



A Lock icon appears on the icon if the panel has established a connection with a
currently secured target Master (requiring a username and password).

Display

The Display Page (FIG. 47), accessed by pressing the Display button on the Status page, allows adjustment of
the default panel settings.
FIG. 47
Display Page
Display Page
Connection Status
icon:
Panel Brightness:
Display Timeout:
46
This button opens the Protected Setup page (page 45).
This button opens the Date & Time page (page 51).
Returns to the Main touch panel page. In this case, the previous page is the
default Main page.
Red - Panel is disconnected from the Master.
Green - Panel is connected to the Master. Blinks when a blink message is received.
Yellow - Panel missed a blink message from the Master. It will remain yellow for 3 missed blink
messages, then turns red. It will return to green when a blink message is received.
Shows the current state of the panel's connection to the Master (green = online, red =
offline). See the Connection Status Icon section on page 46 for details.
Sets the display brightness level of the panel.
• Press the UP/DN buttons to adjust the brightness level. Range = 0 - 100.
• The on-screen bargraph can be dragged to adjust the Brightness level which is then
reflected as a corresponding numeric value within the Panel Brightness field.
Sets the length of time the panel can remain idle before activating the sleep mode.
When the device goes into sleep mode, the LCD is powered down.
• Press the UP/DN buttons to increase/decrease the time until the panel times out.
Range = 0 - 240 minutes.
• Use this button to set the timeout value to zero and disable the sleep mode.
NXD-430/NXD-435 4.3" Wall/Flush Mount Touch Panels

Advertisement

Table of Contents
loading

This manual is also suitable for:

435Nxd-435pNxd-435

Table of Contents