Time & Date Settings Page - AMX NXD-1200VG Operation/Reference Manual

Project Information Page Elements (Cont.)
File Revision:
Dealer ID:
Job Name:
Sales Order:
Purchase Order:
Build Number:
Creation Date:
Revision Date:
Last Save Date:
Blink Rate:
Job Comments:
Time & Date Settings Page
The Time & Date Settings page (FIG. 104) allows you to alter/set the time and date information on the NetLinx Master.
If either the Time/Date is modified on this page (then updated to the Master by pressing the Set Time button), all devices
communicating to that target Master will then be updated to reflect the new information.
Time Display
fields
Currently
selected
FIG. 104 Time and Date Settings page
The only way to modify a panel's time, without altering the Master, is to use NetLinx
code.
The elements of the Time & Date Settings page are described in the table below:
Time & Date Settings Page Elements
Back:
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
Time Date Refresh/Set: This section provides you with two options:
Time Display fields:
Date Display fields:
VG Series Modero Touch Panels
Displays the revision number of the file.
Displays the dealer ID number (unique to every dealer and entered in TPD4).
Displays the job name.
Displays the sales order information.
Displays the purchase order information.
Displays the build number information of the TPD4 software used to create the project file.
Displays the project creation date.
Displays the last revision date for the project.
Displays the last date the project was saved.
Displays the feedback blink rate (10th of second).
Displays any comments associated to the job. These comments are taken from the TPD4
project file.
Returns you to the previously active touch panel page without saving changes (to save
changes, use the Set Time button).
the panel's connection status regardless of what page is currently active.
A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master (requiring a username and password).
• The Get Time/Date button retrieves the Time and Date information from the Master.
• The Set Time/Date button sets the Master to retain and save any time/date modifications
made on the Time and Date Setup page.
These fields display the time in three formats: STANDARD, STANDARD AM/PM, and 24
HOUR.
These fields display the calendar date information in several different formats.
Firmware Pages and Descriptions
Date Display
fields
119