Table of Contents
Advertisement
G4 Web Control Settings Page (Cont.)
• Timeout:
• Network Interface
• Control Name
• Control Password
• Control Port
• Max Connects
• Connect Count
Back:
FIG. 63
Sample relationship between G4 Web Control and Mange WebControl Connections window
Refer to the Using the NetLinx Master to Control the Panel section on page 36 for more detailed instructions
on how to use the G4 Web Control page with the web-based NetLinx Security application.
NXD-430/NXD-435 4.3" Wall/Flush Mount Touch Panels
Sets the length of time (in minutes) the panel can remain idle (no cursor movements)
before the session is closed and the user is disconnected.
• Minimum value = 0 minutes (panel never times-out)
• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)
Displays the detected method of communication to the web.
Wired is used when a direct Ethernet connection is being used for communication to
the web. This is a default setting.
Allows entry of a unique alphanumeric string used as the display name of the panel
within the Manage WebControl Connections window of the new NetLinx Security
browser window.
• This Web Control tab displays a G4 icon alongside the link to the Web Control
Name given to this panel (FIG. 63).
Allows entry of the G4 Authentication session password associated for VNC web
access of this panel.
Allows entry of the VNC Web Server's port value.
• Default value = 5900.
This read-only field displays the maximum number of users that can be connected
simultaneously to the target panel via the Web.
• Default value = 1.
This read-only field displays the current number of users connected to the target
panel via the Web.
This value cannot exceed the Max Connects field.
Saves the changes and returns to the previously active touch panel page.
Setup Pages and Descriptions
59
Advertisement
Table of Contents
