Changing The Input/Output Conditions; Selecting The On Conditions; One-Shot Output - Omron ZFV Series User Manual

Changing the Input/output Conditions

Selecting the ON conditions

Set whether to turn the OUTPUT signal ON when OK is judged or when NG is judged.
MENU Mode-[SYS2]-[OUTPUT]-[ON STATUS]
Setting
OK ON Turns the OUTPUT signal ON when OK is judged.
NG ON (default value) Turns the OUTPUT signal ON when NG is judged.

One-shot output

OUTPUT turns ON for only the preset output time from when the OUTPUT signal turns
ON.
●
Synchronous measurement
OFF
TRG
ON
OFF
OUTPUT
ON
●
Continuous measurement
OUTPUT ON at OK judgment
Judged as NG
OFF
OUTPUT
ON

Changing the Input/output Conditions

Description
Measurement processing
Judged as OK
Output time
Section 3
Output time
Judged as NG
User's Manual
ZFV
61