Chapter 3
Setting the Output Conditions
Setting the Output Conditions
Setting the Filter
Set the filter condition when filtering information obtained from the sensor.
The following types of filters can be set depending on purpose.
Median filter
[MEDIAN]
ZW
3-14
User's Manual
Displacement
Waveform when
Smooth
filter is not set
Median filter
[MEDIAN]
Average filter
[AVE]
Displacement
Differ filter
[DIFFER]
Waveform when
filter is not set
Frequency filter
[FREQ]
Three frequency variations
are mixed.
Spike-like changes are
removed.
Changes are smoothed
out.
Changes are extracted to
eliminate displacement value.
Lowpass filter [LOPASS]
Sudden changes are removed.
Highpass filter [HIPASS]
Gradual changes are removed.
Bandpass filter [BDPASS]
A given change is detected.