Basic Configuration - Omron ZFV Series User Manual

Smart sensors with ultra-high-speed ccd cameras
Hide thumbs Also See for ZFV Series:
Table of Contents

Advertisement

Section 1

Basic Configuration

Basic Configuration
The figure below shows the Basic Configuration of the ZFV Series.
■ Application Expanded Configuration
Up to five Amplifier Units can be gang-mounted.
When the Amplifier Unit is gang-mounted, a wider range of applications can be sup-
ported as simultaneous processing of multiple areas and measurement items can be
combined.
The image captured by the Sensor Head is transferred to the leftmost Amplifier Unit, so
connect to the rightmost Amplifier Unit.
Right
Wrong
• The maximum number of Amplifier Units that can be connected is five regardless of the number
of connected Sensor Heads.Six or more Amplifier Units cannot be connected.
• Provide power to all gang-mounted Amplifier Units.
ZFV
16
User's Manual
Sensor Head
Detects workpieces as images.
• Narrow view type ZFV-SR10
• Wide view type ZFV-SR50
Amplifier Unit
Used for confirming images and menus, performing
measurement processing, and outputting the result
of processing.
• Single-function type ZFV-A10/-A15
• Standard type
ZFV-A20/-A25
Power supply
DC24V (+10%, -15%)
Recommended OMRON power supply
(1) When 1 Amplifier Unit is connected
S82K-01524 (DC24V, 0.6A)
(2) When 2 or 3 Amplifier Units are connected
S82K-05024 (DC24V, 2.1A)
(3) When 4 or 5 Amplifier Units are connected
Prepare the required number of (1) and (2) power supplies above.
Right
Wrong
Recommended power supply unit

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zfv-a10Zfv-a15Zfv-a20Zfv-a25

Table of Contents