WIDTH
■ Specifying edge detection conditions
Set the direction in which edges are searched and the change in density.
Example)
To detect this width
●
Selecting the color of edges
Select the direction of density change for the edge to be detected.
MENU Mode-[CUSTM]-[COLOR]
Setting
WHITE (default value)
BLACK
●
Selecting the edge detection direction
Select the direction in which edges are searched.
MENU Mode-[CUSTM]-[DIRECTION]
Setting
(default value)
Customizing Measurement conditions
Teaching area
COLOR : BLACK
DIRECTION :
A change from dark to light is judged as an edge.
A change from light to dark is judged as an edge.
Searches in the vertical direction.
Searches in the horizontal direction.
Description
Description
Section 3
ZFV
69
User's Manual